无锡市联赢干燥设备有限公司主营:燃煤热风炉|燃油燃气热风炉|直接式燃煤热风炉
当前位置 -> 环亚ag88热风炉知识生物质热风炉安全阀怎样进行检验 发布时间:(2018/12/9)关键词:环亚ag88

生物质热风炉安全阀怎样进行检验

 

环亚ag88 www.cgfly.cn 物质蒸汽热风炉是燃烧生物质颗粒燃料为工业生产提供热水及蒸汽的工业热风炉形式,为了保证生物质蒸汽热风炉的使用安全,需要安装安全阀,生物质蒸汽热风炉安全阀经过长时间的使用,需要进行安全检验。生物质热风炉安全阀的检验:生物质热风炉安全阀热校验时,热风炉已点火启动,因此现场应清扫干净,架子拆掉,符合运行的要求。热校验安全阀的方式、注意亊项应由检修负责人组织检修人员和运行人员共同研究制定,并对参加校验的人员分工。准备好通信设备及联络信号,并且准备好校验中要用的粉笔、小黑板、扳手、手锤、螺丝刀、压板等工具和物品?;簧媳曜佳沽Ρ?,校验时要经常和司炉操作盘上的压力表进行对照。

Material steam hot-blast stove is an industrial hot-blast stove which burns biomass pellet fuel to provide hot water and steam for industrial production. In order to ensure the safety of biomass steam hot-blast stove, it is necessary to install safety valve. After a long period of use, the safety valve of biomass steam hot-blast stove needs safety inspection. Inspection of safety valve of biomass hot-blast stove: When the safety valve of biomass hot-blast stove is hot-checked, the hot-blast stove has been ignited and started, so the site should be cleaned and the shelf removed, which meets the requirements of operation. The way and items of safety valves for thermal verification shall be worked out by the maintenance personnel and operators, and the personnel participating in the verification shall be divided into different parts. Prepare communication equipment and contact signal, and prepare tools and articles such as chalk, blackboard, wrench, hammer, screwdriver, pressure plate and so on. When replacing the standard pressure gauge, the pressure gauge on the operating plate of the furnace should be checked regularly. 当生物质蒸汽热风炉压力升到0.5-1MPa时,检修人员应按规定紧螺丝,紧所有阀门盘根。当压力升至额定压力时,应对热风炉进行一次全面的严密性检查,并将检查结果做好记录。经检査确定无影响热风炉正常运行的缺陷后,方可进行安全阀的校验工作。

When the pressure of biomass steam hot blast stove rises to 0.5-1 MPa, the inspectors should tighten the screw and all the valve discs according to the regulations. When the pressure rises to the rated pressure, a comprehensive tightness check should be carried out on the hot blast stove, and the inspection results should be recorded. The safety valve can be checked only after the defect that does not affect the normal operation of the hot blast stove has been determined by the inspection.

以上就是生物质蒸汽热风炉安全阀检验措施,生物质热风炉采用特有的二次风结构,有效的改善了炉内的空气力场,将炽热的颗粒引向前拱,有利于燃料的引燃点火,同时也延长了燃料在炉内的停留时间,提高了燃料的适应性和利用率

Above is the safety valve inspection measure of biomass steam hot blast stove. The biomass hot blast stove adopts the unique secondary air structure, which effectively improves the air force field in the furnace, leads the hot particles forward arch, which is conducive to ignition of fuel, prolongs the residence time of fuel in the furnace, and improves the adaptability of fuel. And utilization rate


版权所有@转载请注明:http://www.cgfly.cn/shownews.asp?id=365

本站网址:环亚ag88 来源:联营热风炉  浏览次数:150 
相关阅读:有关热风炉改造的基本知识点 | 热风炉房设备节能降耗有效措施简析 | 环亚ag88

版权所有:无锡市联赢干燥设备有限公司主营:环亚ag88    电话:0510-83955910    传真:0510-83051522    技术支持:易商科技