无锡市联赢干燥设备有限公司主营:燃煤热风炉|燃油燃气热风炉|直接式燃煤热风炉
当前位置 -> 环亚ag88热风炉知识生物质热风炉要及时清除热风炉受热面的积灰 发布时间:(2018/11/22)关键词:环亚ag88

生物质热风炉要及时清除热风炉受热面的积灰

 

环亚ag88 www.cgfly.cn 生物质热风炉要及时清除热风炉受热面成都收账积灰.热风炉采用最适合生物质燃料燃烧成都找人公司燃烧设备----往复炉排。热风炉在结构设计上,相对传统热风炉炉膛空间较大,同时布置非常合理成都收账二次风,有利于生物质燃料燃烧时瞬间析出收账大量挥发分充分燃烧。

Biomass hot-blast stove should remove ash on heating surface of hot-blast stove in time. Hot-blast stove adopts reciprocating grate, which is the most suitable combustion equipment for biomass fuel combustion. In the structure design of hot blast stove, compared with the traditional hot blast stove, the furnace has larger space and reasonable secondary air arrangement, which is conducive to the full combustion of a large amount of volatile matter released in the instant of biomass fuel combustion.

热风炉可配有燃油(燃气)点火燃烧器,实现点火自动化。热风炉成都找人公司给料、燃烧、除渣、给水、点火都可采用自动控制,操作非常方便。热风炉配有自动清灰装置,能及时清除成都找人公司受热面的积灰,保证成都收账公司高效稳定运行。成都收账公司尾部布置有省煤器、也可根据用户需要布置空气预热器。相对传统的热风炉,热风炉效率更高,排烟温度低。

Hot blast stove can be equipped with fuel (gas) ignition burner to realize ignition automation. The feeding, combustion, slag removal, water supply and ignition of hot blast stove can be controlled automatically, and the operation is very convenient. Hot blast stove is equipped with automatic ash cleaning device, which can remove the ash deposited on the heating surface of hot blast stove in time and ensure the efficient and stable operation of hot blast stove. The economizer is arranged at the rear of the hot stove, and the air preheater can also be arranged according to users' needs. Compared with the traditional hot stove, the efficiency of the hot stove is higher and the exhaust temperature is low.

采用高效保温材料,热风炉表面温度低,散热损失可以忽略不计。严格按中国国家规范和标准生产,所有受压部件均采用优质热风炉钢材。每台热风炉出厂前都要经过严格的检验和测试,包括水压试验和X射线检测。设置有人孔、检查门、观火孔等,维护保养十分方便。生物质热风炉的最大特点是:节能、环保,且安装使用方便。

With high efficiency insulation material, the surface temperature of the hot stove is low, and the heat loss can be neglected. According to China's national standards and standards strictly, all pressurized parts are made of high quality hot blast stove steel. Every hot blast stove must undergo strict inspection and test before leaving the factory, including water pressure test and X ray inspection. It is convenient to maintain and maintain manholes, check doors and fire holes. The main characteristics of biomass hot stove are: energy saving, environmental protection, and easy installation and use.

燃料供应

Fuel supply

热风炉的燃料是BMF燃料,燃料由输料机送入炉顶料仓,然后由螺旋给料机送入炉膛,均匀散落在炉排上。

The fuel of hot blast stove is BMF fuel. The fuel is fed into the top bin by the feeder, and then into the furnace by the screw feeder, evenly scattered on the grate.

燃烧过程

Combustion process

燃料被螺旋给料机送入炉膛,在此处由于高温烟气和一次风的作用逐步预热,干燥、着火、燃烧,此过程中析出大量挥发分,燃烧剧烈。产生的高温烟气冲刷热风炉的主要受热面后,进入热风炉尾部受热面省煤器和空气预热器,再进除尘器,最后经烟囱排入大气。未气化的燃料边向炉排后部运动,直至燃尽,最后剩下的少量灰渣落入炉排后面的除渣口。

The fuel is fed into the furnace by the screw feeder, where it is gradually preheated, dried, ignited and burned due to the action of high temperature flue gas and primary air. During this process, a large amount of volatile matter is precipitated and burned intensely. After the high temperature flue gas washes out the main heating surface of the hot blast stove, it enters the economizer and air preheater of the heating surface at the tail of the hot blast stove, then enters the dust collector, and finally discharges into the atmosphere through the chimney. The non-gasified fuel moves towards the back of the grate until it burns out. Finally, a small amount of residue falls into the slag removal port behind the grate. 


版权所有@转载请注明:http://www.cgfly.cn/shownews.asp?id=348

本站网址:环亚ag88 来源:联营热风炉  浏览次数:181 
相关阅读:生物质热风炉结构特点及设计要点 | 生物质热风炉怎么不能自动传送 | 环亚ag88

版权所有:无锡市联赢干燥设备有限公司主营:环亚ag88    电话:0510-83955910    传真:0510-83051522    技术支持:易商科技